MODEL 5081-A
SECTION 1.0
DESCRIPTION AND SPECIFICATIONS
1.8 TRANSMITTER DISPLAy DURING CALI-
BRATION AND PROGRAMMING (Figure 1-1)
1. Continuous display of oxygen, chlorine, or ozone read-
ing.
2. units: ppm, ppb, or % saturation.
3. Current menu appears here.
4. Submenus, prompts, and diagnostic readings appear
hear.
5. Commands available in each submenu or at each
prompt appear here.
6. Hold appears when the transmitter is in hold.
7. Fault appears when the transmitter detects a sensor or
instrument fault.
1.9 INFRARED REMOTE CONTROLLER
(Figure 1-2)
1. Pressing a menu key allows the user access to cali-
brate, program, or diagnostic menus.
2. Press ENtER to store data and settings. Press NEXt
to move from one submenu to the next. Press EXIt to
leave without storing changes.
3. use the editing keys to scroll through lists of allowed
settings or to change a numerical setting to the desired
value.
4. Pressing HoLd puts the transmitter in hold and sends
the output current to a pre-programmed value. Pressing
RESEt causes the transmitter to abandon the present
operation and return to the main display.
FIGURE 1-2. INFRARED REMOTE CONTROLLER
1.
4.
3.
2.
ppm
F
A
u
L
t
H
o
L
d
6
7
3
4
1
2
5
FIGURE 1-1. TRANSMITTER DISPLAy DURING
CALIBRATION AND PROGRAMMING
the program display screen allows access to
calibration and programming menus.
4
CALIBRATE
PRoGRAM
dIAGNoSE
C A L I b r A t E
E x I T
N E x T
E N T E R
