ABNT NBR IRC 60079-11. This must be taken into account when
installing the equipment.
2. The enclosure may be made of aluminum alloy and given protective
polyurethane paint finish; however, care should be taken to protect it
from impact or abrasion if equipment requires EPL Ga.
3.9
Additional certifications
3-A
®
All Rosemount 3051HT transmitters with the following connections are 3-A
approved and labeled:
T32: 1
½
-in. Tri Clamp
T42: 2-in. Tri Clamp
If process connection B11 is selected, see reference the ordering table of the
Rosemount 1199 Diaphragm Seal PDS (00813-0100-4016) for availability of
3-A certifications.
A 3-A certificate of compliance is available by selecting option code QA.
EHEDG
All Rosemount 3051HT transmitters with the following connections are
EHEDG approved and labeled:
T32: 1
½
-in. Tri Clamp
T42: 2-in. Tri Clamp
If process connection B11 is selected, see reference the ordering table of the
Rosemount 1199 Diaphragm Seal PDS (00813-0100-4016) for availability of
EHEDG certifications.
An EHEDG certificate of compliance is available by selecting option code QE.
Ensure gasket selected for installation is approved to meet both application
and EHEDG certification requirements.
ASME-BPE
All Rosemount 3051HT Transmitters with option F2 and the following
connections are designed to ASME-BPE SF4 standards
T32: 1
½
-in. Tri Clamp
T42: 2-in. Tri Clamp
A self-certified certificate of compliance to ASME-BPE is also available
(option QB)
(1)
Per Clause SD-2.4.4.2 (m), suitability of painted aluminum housings to be
determined by end user.
Quick Start Guide
June 2020
24
Emerson.com/Rosemount
