Emerson Rosemount 2230, Reference Manual

Page: 83 / 156

73
Reference Manual
00809-0100-2230, Rev CA
Configuration and Operation
July 2017
Configuration and Operation
Custom parameters and units
1. In the Guided Setup window click the Custom Parameters button.
2. Configure all the MAO Blocks that are used. Ensure that unused MAO block inputs are unconfigured,
i.e. that there are no tank numbers or tank parameters configured for these inputs.
3. Click the Send button to store the current configuration in the device configuration database.
4. Once the MAO Block mapping is finished, you may proceed with configuration of custom parameters
if needed. Return to the Guided Setup window and click the Custom Parameters button to open the
Custom Parameters window.
5. This window lets you specify names for various custom parameters:

The Long Custom Parameter Name is used for the Single Value view and the Two Values View on the
Rosemount 2230 display. It may be up to 20 characters long.

The Short Custom Parameter Name is used for the Four Values View on the Rosemount 2230 display. It
may be up to four characters long.
6. Press the Send button to store the current configuration in the device configuration database.
7. Press the Close button to return to the Guided Setup window.
8. Proceed with configuration of custom units by clicking the Custom Units button.