27
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF965
15. Trouble Shooting
WARNING:
FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLE SHOOTING YOUR FAN.
!
!
!
!
TROUBLE PROBABLE CAUSE SUGGESTED REMEDY
1. Fan will not start.
1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers.
2. Loose electrical connections to the fan. 2. Check all wire connections on the fan.
WARNING:
Make sure main power is turned OFF.
2. Fan sounds noisy.
1. Blades are not tightly fastened to the fan. 1. Check all blade screws for tightness.
2. Loose screws in fan motor. 2. Check to make sure all screws in fan motor are snug
(not over-tight).
3. Light fixture connectors are rattling 3. Reposition the connectors and carefully reassemble the cover
inside the light kit housing adapter.
WARNING:
Make sure main power is turned OFF.
3. Fan wobbles
1. Blades are not tightly fastened to the fan. 1. Check all blade screws for tightness.
excessively.
WARNING:
Make sure main power is turned OFF.
2. Fan blades out of balance. 2. Interchange an adjacent (side-by-side) blade pair to
redistribute the weight. Locate the supplied blade balancing
kit and follow the included instructions.
4. Lamp will not
1. Loose electrical connectors. 1. Shut off the branch circuit electricity at the fuse box or breaker.
illuminate.
panel and check the receiver electrical connectors for proper
installation.
2. The lamp is burnt out. 2. Turn the electricity off and replace the lamp with a new 50W
maximum lamp.
3. Lamp turns on and then turns off. 3. The built-in circuit breaker is tripping. Check that the lamp is
50W maximum.
CAUTION: Turn the lights off before touching halogen
lamps, they are very hot and can burn your fingers.
Summary of Contents for Portland CF965BS00
Page 30: ...30 ETL Model No CF965 Notes ...