17
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF965
6. Installation of Downlight
(Continued)
LIGHT KIT ASSEMBLY
50-WATT (maximum) MINI-HALOGEN
BASE BULBS (3)
LIGHT KIT FIXTURE
SOCKETS (3)
Figure 26
6.9
Screw the three 50-watt (maximum) mini-halogen base
bulbs (supplied) in the light kit fixture sockets
(Figure 26).
NOTE: Do not touch the halogen mini-halogen base
bulbs with bare hands. Fingerprints may result in
shorter bulb life. Remove fingerprints with rubbing
alcohol.
GLASS SHADE
Figure 27
6.10
Place the glass shade into the opening in the light kit
assembly, aligning the three flat areas on the top edge of
the glass with the three raised dimples on the light kit
assembly and turn the glass shade clockwise until it is fully
seated (Figure 27).
NOTE: Periodically check that the glass shade is
seated fully clockwise in the light kit assembly.
To avoid risk of burns or other injuries, turn power off
and allow lamp to fully cool before attempting to replace
the mini-halogen base bulbs.
WARNING
!
Summary of Contents for Portland CF965BS00
Page 30: ...30 ETL Model No CF965 Notes ...
