7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF965
3. Ceiling Fan Assembly
(Continued)
CEILING FAN
(partially assembled)
STYROFOAM
Figure 5
3.8
Carefully turn the partially assembled ceiling fan over and
place it on the styrofoam for final preparation (Figure 5).
NOTE: Be extra careful not to bend the ceiling fan
blades while turning the fan over onto the styrofoam.
NOTE: If using a longer accessory downrod, discard
the supplied 4.5" downrod and install the longer
downrod (sold separately) using the following
instructions.
3.9
Remove the hanger ball by loosening the setscrew in the
hanger ball until the ball falls freely down the downrod
(Figure 6).
Remove the pin from the downrod, then remove the
hanger ball.
Retain the pin and hanger ball for reinstallation in Step
3.15.
NOTE: Do not loosen the screw holding the green
ground wire.
SETSCREW
(LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN
GROUND
WIRE
Figure 6
3.10
Separate, untwist and unkink the two 80” motor leads.
Route the 80” black and white motor leads through the
downrod (Figure 7).
4.5" DOWNROD
TWO 80" MOTOR
LEADS (UNTWISTED)
Figure 7
Summary of Contents for Portland CF965BS00
Page 30: ...30 ETL Model No CF965 Notes ...
