16
PACSystems™ RSTi
-EP EPSCPE100 Standalone CPU Quick Start Guide
GFK-3012E
•
Ethernet cable for connecting the PME programmer computer to the CPE100.
•
Very small slotted screwdriver (2
mm jeweler’s size)
for securing wires to the
connector shown in Figure 10.
Basic Installation Steps:
For start-up and configuration of the CPE100, complete the following steps:
1)
Be sure to disconnect the power to CPE100.
2)
Mount the unit as described
3)
The ESCPE100 is designed to be DIN-rail-mounted.
4)
Plug the Ethernet cable for Programmer & Protocol (SRTP, Modbus, EGD) into
the LAN 1 port.
5)
Plug the Ethernet cable for the PROFINET network into a LAN 2 port.
6)
Apply power to CPE100.
