28
PACSystems™ RSTi
-EP EPSCPE100 Standalone CPU Quick Start Guide
GFK-3012E
7.
How to reset the firmware update password?
a)
Use programming software or the controller’s
RUN/STOP pushbutton (if
enabled in the hardware configuration) to place the RSTi-EP Controller
module in Stop Disabled mode
.
b)
Open a browser window and go to the PACSystems RSTi-
EP Controller’s
homepage using the IP address assigned to the controller’s embedded LAN
1 or LAN 2 Ethernet ports. (e.g.
c)
At the PACSystems RSTi-
EP Controller’s homepage, select the
Administrator button in the top right-
hand corner and select the ‘Reset
Password’ option. Dismiss any
security warnings the browser may present
indicating the certificate is not issued by a known certificate authority. The
certificate is dynamically generated by the firmware on each power cycle
(i.e. the certificate is self-signed).
Note: If the controller becomes unresponsive it is recommended to repeat
the process from step (b) again.
d)
Press the Run/Stop button on the unit as directed until the page updates.
e)
Release the Run/Stop button on the unit as directed.
f)
Enter the new firmware update password and confirm it by entering it a
second time. Press OK. The unit will save the password and return to the
homepage. The rules for the password are displayed on the screen.
Note:
•
Performing a factory reset operation also resets the firmware update
password to its default value.
