27
PACSystems™ RSTi
-EP EPSCPE100 Standalone CPU Quick Start Guide
GFK-3012E
5.
How can I recover the controller from the Stop/Faulted state?
a.
A Stop/Faulted state cannot persist through a power cycle. To recover the
controller, there are two methods:
i.
Power cycle the controller
ii.
Perform a CLEAR operation from the PME software.
6.
When should I replace the internal supercapacitor?
Whenever a “Failed Battery Signal” fault is logged in the controller’s fault table,
replace the internal supercapacitor by following the instructions in the section
entitled
Replacement of Internal Supercapacitor.
