PACMotion VFD Syllabus
Section 10
GFK-3167B
December 2020
Bluetooth USB and Serial Cable (Note 7)
44
7.
Click the Scan button.
You should see the VFD BluetoothStick USB device in the list such as below:
Figure 42: VFD BlutoothStick Displayed in List
8.
Click the small box to select the VFD BluetoothStick device for connection.
9.
Click the Connect button to connect to the Bluetooth Device.
10.
Click the Scan Drive Network button (Allow a few seconds for the scan to complete).
This should find the VFD and transfer parameters from the VFD to the Studio.
In factory default mode you will only see Group 1 Tab with parameters (rows) for the VFD.
Figure 43: Group 1 Tab
11.
Click on the variable number in the Value Column for P1-14 Extended Menu Access Code.
12.
Change the value to 201 and then press enter to accept the value.
You should see more Parameter tabs now (Group 0 to Group 9).
