Contents
1.1 About this document...................................................................................................................5
1.2 Hazard messages.........................................................................................................................5
1.3 Related documentation............................................................................................................... 6
2.1 Installation checklist.................................................................................................................... 7
2.2 Additional considerations for retrofitting existing installations.................................................... 8
2.3 Power requirements.................................................................................................................... 9
2.4 1600 transmitters in Ethernet networks.....................................................................................10
3.1 Mounting and sensor wiring for integral-mount transmitters.....................................................13
3.2 Ground the meter components................................................................................................. 13
3.3 Rotate the transmitter on the sensor (optional)......................................................................... 15
3.4 Rotate the transmitter display................................................................................................... 15
4.1 Available channels..................................................................................................................... 17
4.2 Wire the I/O channel.................................................................................................................. 17
4.3 Wire the Ethernet channels........................................................................................................23
5.1 Wiring the VDC power supply.................................................................................................... 25
5.2 Wiring the Power over Ethernet (PoE) power............................................................................. 26
5.3 Wire the power supply using an M12-terminated cable (optional)............................................. 27
6.1 Set up the printer by changing the printer default IP address..................................................... 29
6.2 Set up the printer using the printer default IP address................................................................31
6.3 Reset the interface settings....................................................................................................... 32
6.4 Function Check Failed................................................................................................................ 33
Installation Manual
Contents
00825-0100-1600
March 2022
Installation Manual
3