Emerson Location Awareness, Quick Start Manual

Page: 27 / 36

3. The surface resistivity of the housing is greater than 1GΩ. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with
solvents or a dry cloth.
La résistivité de surface du boÎtier est supérieure à un gigaohm. Pour
éviter l’accumulation de charge électrostatique, ne pas frotter ou
nettoyer avec des produits solvants ou un chiffon sec.
Note
Conditions 1, 2, 3 do not apply to the GEO10.
4. Substitution of components may impair intrinsic safety.
La substitution de composants peut compromettre la sécurité
intrinsèque.
10.8 Europe
I1 ATEX Intrinsic Safety
Certificate SGS19ATEX0091X
Standards EN IEC 60079-0: 2018, EN 60079-11: 2012
Geo 10 Markings
II 1 G Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +60°C), IP66/67;
Geo 20 Markings
II 1 G Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +70°C), IP66/67,
Type 4X
Special Conditions for Safe Use (X):
1. The plastic enclosure of the GEO20 Anchor may constitute a
potential electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
2. Do not change the battery when an explosive atmosphere is present.
3. Only replace battery with Rosemount Part No. 00G45-9000-0001.
Note
Conditions 1, 2, 3 do not apply to the GEO10.
10.9 International
I7 IECEx Intrinsic Safety
Certificate IECEx BAS 19.0080X
Standards IEC 60079-0: 2017, IEC 60079-11: 2011
Geo 10 Markings Ex ia IIC T4 Ga (-20°C ≤ Ta ≤ +60°C), IP66/67;
Geo 20 Markings Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +70°C), IP66/67, Type 4X.
February 2020 Quick Start Guide
Quick Start Guide 27