Emerson Location Awareness, Quick Start Manual

Page: 26 / 36

3. The surface resistivity of the housing is greater than 1GΩ. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with
solvents or a dry cloth.
Note
Conditions 1, 2, 3 do not apply to the GEO10.
4. Substitution of components may impair intrinsic safety.
10.7 Canada
I6 Canada Intrinsically Safe (IS)
Certificate [CSA] 80004152
Standards CAN/CSA-C22.2 No. 60079-0:19, CAN/CSA-C22.2 No.
60079-11:14, CAN/CSA- C22.2 No. 61010-1-12 (r 2017),
CSA C22.2 No. 94.1-15, CSA C22.2 No. 94.2-15
Geo 10
Markings Intrinsically safe for:
Class I, Division 1, Groups A, B, C, D T4;
Class I Zone 0, AEx ia IIC T4 Ga
Ex ia IIC T4 Ga
T4 (-20°C ≤ Ta ≤ +60°C)
when installed per Rosemount drawing 00GEO-1006;
IP66/67;
Geo 20
Markings Intrinsically safe for:
Class I, Division 1, Groups A, B, C, D T4;
Class I Zone 0, AEx ia IIC T4 Ga
Ex ia IIC T4 Ga
T4 (-40°C ≤ Ta ≤ +70°C)
when installed per Rosemount drawing 00GEO-1106;
IP66/67, Type 4X;
Special Conditions for Safe Use (X):
1. Do not replace battery when explosive atmosphere is present.
Ne pas remplacer les accumulateurs si une atmosphère explosive
peut être présente.
2. Use only 00G45-9000-0001 batteries.
Utiliser uniquement des accumulateurs 00G45-9000-0001.
Quick Start Guide February 2020
26 Emerson.com