Emerson Location Awareness, Quick Start Manual

Page: 15 / 36

If the Emerson Location Anchor was configured with the network ID and join
key, and sufficient time has passed, the Anchor will be connected to the
network. If network ID and join key were not configured, reference
“Troubleshooting”.
Note
It may take several minutes for the Location Anchor to join the network.
Field Communicator
For Wireless HART communication, an Emerson Location Anchor Device
Driver (DD) is required. To obtain the latest DD, visit the Emerson Easy
Upgrade site at:
Emerson.com/Rosemount/Device-Install-Kits .
The communication status may be verified in the wireless device using the
following the menu items.
Function Menu items
Communications Join Status, Wireless Mode, Join Mode, Number of
Available Neighbors, Number of Advertisements Heard,
Number of Join Attempts
Wireless Gateway
Using the Gateway’s web interface, navigate to the Devices page as shown
in
Figure 5-1 . Locate the device in question and verify all status indicators are
good (green).
Figure 5-1: Wireless Gateway Explorer page
February 2020 Quick Start Guide
Quick Start Guide 15