Emerson Liebert SRC Series, User Manual

Page: 14 / 124

Important Safety Instructions
Liebert
®
SRC
™
User Manual 4
NOTICE
Risk of exposure to corrosive environments. Can cause equipment damage. Don’t install the unit
where it’s directly exposed to ocean winds.
Ocean winds may cause corrosion, particularly on the condenser and evaporator fins, which, in
turn could cause product malfunction or inefficient performance.
NOTICE
Risk of water damage and abnormal vibration. Can cause equipment damage
When installing the unit in a low-lying area, or a location that is not level, use a raised concrete pad
or concrete blocks to provide a solid, level foundation.
NOTICE
Risk of excessive condensation. Can cause building and equipment damage.
Properly insulate all cold surfaces to prevent “sweating.” Cold surfaces such as uninsulated piping
can generate condensate that may drip and cause a slippery floor condition and/or water damage
to walls.
NOTICE
Risk of exposure to excessive Electro-Magnetic Interference. Can cause equipment malfunction.
When installing the unit in a hospital, mechanical room, or similar electromagnetic field (EMF)
sensitive environment, provide sufficient protection against electrical noise.
Inverter equipment, power generators, high-frequency medical equipment, or radio communication
equipment may cause the unit to operate improperly. The unit may also affect such equipment by
creating electrical noise that disturbs medical treatment or image broadcasting.
!
CAUTION
Risk of contact with extremely hot and cold surfaces. Can cause injury. Refrigerant piping is
extremely hot or cold during unit operation. Do not touch the refrigerant piping during or after
operation. Wear thermally insulated gloves and arm protection or allow the piping to cool or warm
to a safe handling temperature before working on the piping.
!
CAUTION
Risk of improper lifting and moving of a heavy unit. Can cause building and equipment damage
and injury. Be very careful when transporting the product.
• Do not attempt to carry the product without assistance. Some products use polypropylene
bands for packaging. Do not use polypropylene bands to lift the unit.
• Suspend the unit from the base at specified positions.
• Support the unit a minimum of four points to avoid slippage from rigging apparatus.
Verify that all lifting apparatus is rated for the weight of the unit. See XREF TABLE for indoor and
outdoor unit weights.
!
CAUTION
Risk of contact with sharp edges, and extremely hot or cold components. Can cause injury. Wear
OSHA approved head and eye protection, thermally insulated gloves and arm protection or allow
the unit to reach a safe for contact temperature and use caution when cleaning or servicing the
unit.