Service Menu Parameters
83
Figure 72 iCOM-DO Overview and Override - Page 1
Liebert iCOM-DO
—This parameter shows the connection status of a Liebert iCOM-DO card. It dis-
plays “connected” when a Liebert iCOM-DO card has been set up and connected to the Liebert iCOM
via the CAN bus.
Override
—Selecting Override permits manual testing of the Liebert iCOM-DO by activating each
output on the following screen.
Figure 73 iCOM-DO Events Setup - Page 2
Status
—This column shows whether an output is in a normally closed or normally open state.
Output #
—This column shows which output is tied to a particular alarm. The default values are set
to be the same output as the Liebert ENV-DO card, the predecessor to the Liebert iCOM-DO.
ID
—This column displays the number of the Liebert iCOM-DO. Currently only one Liebert iCOM-DO
card is supported.
iCOM-DO Overview and Override (pg 1 of 3)
to change parameter
to confirm
to select parameter
for next/previous unit
then
UNIT 01
PASSWORD (Actual Level 3)
????
iCOM-DO #0
connected
Override #0
no
S720
S721
S722
S723
S724
S725
S726
S727
S728
S729
S730
iCOM-DO Events Setup (pg 2 of 3)
to change parameter
to confirm
to select parameter
for next/previous unit
then
UNIT 01
S731
S732
S733
S734
S735
S736
S737
S738
S739
S740
S741
PASSWORD (Actual Level 3)
????
Event Description
ID Output # Status
Cooling Status
No
9
0
Heating Status
No
9
0
Humidifying Status
No
10
0
Dehumidifying Status
No
11
0
High Temperature
No
12
0
High Humidity
No
13
0
Low Temperature
No
14
1
Low Humidity
No
15
1
Summary of Contents for Liebert Challenger 3000
Page 2: ......
