Emerson iP500BK Owner'S Manual Download Page 37

Page: 37 / 44

To Activate or Deactivate The Alarm

Press the

Alarm On/Off

button once on the top panel, or on the remote control, to

activate the alarm.

One of the alarm mode icons will appear in the time

display to confirm that the alarm is ‘On’.

Press the

Alarm On/Off

button again to deactivate the alarm. The alarm icon

disappears.

Wake-up To Radio

1.) Turn the radio ‘On’, select the station that you wish to hear at the wake-up

time, and turn the radio ‘Off’ again.

2.) Check and adjust the alarm time setting if necessary and make sure the

“

RAD

” alarm mode is selected.

3.) Press the

Alarm On/Off

button to activate the alarm. Make sure the “

RAD

”

icon appears in the display.

4.) At the selected wake up time the radio will turn on automatically. It starts softly

and gradually gets louder.

It will continue to play for 60 minutes and then shut

off automatically until the following day.

5.) To stop the radio alarm sooner, press the

Alarm On/Off

button once. The

radio stops immediately but the “

RAD

” indicator remains in the display and

the alarm remains set for the following day.

To deactivate the alarm completely press the

Alarm On/Off

button once more.

The “

RAD

” indicator disappears.

iP500_042307.p65

23/4/2007, 17:01

Summary of Contents for iP500BK













































Search results

Summary of Contents for iP500BK

Reviews:

Related manuals for iP500BK

Brands by name

Popular brands

Emerson iP500BK, Owner'S Manual

Search results

Summary of Contents for iP500BK

Reviews:

Related manuals for iP500BK

Brands by name

Popular brands