27
NOTE:
If you are using either the 30GB or 60GB fifth generation iPod
®
models with video capability, or the 2G (Second Generation) iPod
®
nano,
use the adapters that were supplied with the iPod
®
s at time of purchase.
They will fit correctly in the docking cradle of this system.
IMPORTANT!
• If you are using a “1G (First Generation) iPod
®
nano” you must slide the
docking connector to the ‘left’ position before inserting the required adapter
as shown in the following illustrations:
• If later you decide to install a different iPod
®
model you must remove the
nano adapter from the docking cradle and slide the docking connector
back to the ‘right’ position before inserting the appropriate adapter.
3.) Slide your iPod
®
into the adapter and make sure that it slides down as far as
possible until it is correctly seated on the iPod
®
connector.
4.) Press the
Power
button of this system to turn the power ‘On’.
5.) Press the
Function
button of this system to select
the
iPod
function. The “
iPod
” indicator appears in
the display.
iP500_042307.p65
23/4/2007, 17:01
27