30
Connecting and Playing A 1G (First Generation) iPod
®
Shuffle
The docking station of this system includes an Apple USB connector specifically
designed for the 1G (First Generation) iPod
®
Shuffle with direct USB connector.
Note:
If you have a new 2G (Second Generation) iPod
®
Shuffle you may
connect it to the Auxiliary Input jack of this system. Please refer to the
connection instructions on page 33.
IMPORTANT!
• Do not attempt to connect other portable MP3 players or portable USB
drives to this iPod
®
Shuffle USB connector. You can connect MP3 players
to the Auxiliary Input (
AUX IN
) jack of this system but not to the USB
connector. This system is not compatible with portable USB storage drives
that contain compressed MP3 or WMA audio files.
• The iPod
®
Shuffle has no interface to receive commands from an external
controller, therefore you cannot use the
iPod
PLAY/PAUSE
button,
the
(
) /
–
(
)
buttons on the top panel, or the
iPod FWD. / iPod
REV.
buttons on the remote control of this system to operate the iPod
®
Shuffle. You can only use the controls on the iPod
®
Shuffle itself.
1.) Set the function switch on your iPod
®
Shuffle to either the Normal or Shuffle
playback position and remove the protective cap.
2.) Connect your iPod
®
Shuffle to the USB connector on the docking station. It can
only be connected one way, with the front panel of the Shuffle facing outward.
Press the
Power
button on this system to turn the power ‘On’.
Original iPod
®
Shuffle
(First Generation)
iP500_042307.p65
23/4/2007, 17:01
30
