![background image](http://html.mh-extra.com/html/emerson/inspire-1hdez-1521/inspire-1hdez-1521_installation-instructions-manual_104552013.webp)
13
AD
V
ANCED
INS
TALLER MENU
From the Home screen press the and buttons at the same time for
three seconds.
Press
Enter
button to save any changes and display the previous menu or
press
Home
to display the Home Screen.
Items on the
Advanced Installer Menu
are:
Communicating Devices – select system configuration options
Fault Status – indicates equipment faults that have been detected
USB Upload – select thermostat settings to be uploaded from a
pre-loaded USB
Thermostat Summary – indicates software version of thermostat
Heat Pump Lockout* – disable heat pump below a selectable temperature
(when using electric Aux heat)
Dual Fuel Setpoint* – disable heat pump below a selectable temperature
(when using fossil fuel Aux heat – dual fuel)
Aux Lockout* – disable Aux heat above a selectable temperature
Heat Cycle Rate – adjust the duration for a call for heating
Cool Cycle Rate – adjust the duration for a call for cooling
Humidity Display Adjust – off-set the humidity that is displayed
Installation Test – equipment test for communicating systems only
*May or may not appear in the list depending on the configuration of
the system
IMPORTANT: Allow up to
5
minutes for menu options to become available
after changing settings.
Advanced Installer Menu
Summary of Contents for Inspire 1HDEZ-1521
Page 31: ......