13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: HF948 & HF956
5. How to Wire Your Ceiling Fan
(Continued)
5.5
Slide the upper canopy up the rod within 1/4" of the ceiling
or beam and securely tighten the setscrew (Figure 19).
UPPER CANOPY
SETSCREW
Figure 19
6. Wall Control Installation
6.1
General Information
The SW95 Wall Control is designed to operate only
one ceiling fan, and Not an accessory light kit.
The SW95 Wall Control is rated for 1.25 Amp, 120
VAC, 60 HZ full load.
All ceiling fans must be completely installed before
installation of the Wall Control.
Your new Wall Control will require a grounded
electrical supply line of 120 volts AC, 60 HZ circuit.
NOTE: Do not install a solid state electronic romote
control with the SW95 wall control installed, damage
to the fan motor could result.
6.2
Installation of Wall Control replacing an
Existing Wall Control:
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to install the
ceiling fan mounting plate on the outlet box.
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
WARNING
!
Summary of Contents for HF948BS02
Page 20: ...10 Repair Parts 1 2 4 5 6 11 12 18 14 13 17 15 7 16 8 3 9 20 U L Model No HF948 HF956 ...
Page 22: ...Notes 22 U L Model No HF948 HF956 ...
Page 46: ...46 No de modelo U L HF948 y HF956 Notas ...
Page 68: ...1 2 4 5 6 11 12 18 14 13 17 15 7 16 8 3 9 68 Modèle U L N HF948 HF956 10 Pièces de rechange ...
