Emerson HF948BS02, Owner'S Manual

Page: 10 / 72

10
U.L. Model No.: HF948 & HF956
J-HOOK
2-1/2"
1-1/2"
OUTLET BOX
WOOD JOIST
Figure 12
4.3
Lift the fan onto the J-hook and position as shown in
Figure 13.
Make sure the motor wires and retention cable at the top of
the hanger pipe are positioned behind J-hook as illustrated
in Figure 13.
CAUTION: The electrical wires and retention cable
must not be placed between the rubber roller and the
hook, but rather as illustrated in Figure 13.
4.2
On Wood Joist -
Locate and drill a pilot hole in the wood
joist. Install the screw type J-hook so that hook extends
2-1/2” below the outlet box (Figure 12).
CAUTION: The pilot hole should be drilled no larger
than the minor diameter of the screw threads on the
hook (1/4” max.). Do not put a lubricant on the
J-hook. At least 1-1/2” of the screw threads should be
secured into the structural wood joist.
Read and follow instructions carefully. Failure to comply
with instructions could result in risk of fire, electric
shock, fan falling and injury to persons.
WARNING
!
J-Hook must be supported by building structure.
WARNING
!
RETENTION
CABLE
WIRES (3)
Figure 13
4. How to Hang Your Ceiling Fan
(Continued)
WOOD JOIST