22
Chapter 2 Installation and Connection of the System
GIE 4820/3A/3.45KW Power Supply System User Manual
Fig. 2-1 Installation of System Components
2.4.1 Installation of System Subrack
Take out the subrack from the package and insert into its cabinet. Install the screws
in the four installation holes as shown in the Fig.2-1 above with a cross screwdriver.
2.4.2 Installation and Disassemble of Rectifier Module and Monitoring module
Take out the rectifier modules and monitoring module one by one from the packing.
The installation positions of these modules on the subrack are shown in Fig. 2-1.
1. Installation and Disassemble of Rectifier Module
Slowly push the rectifier module into its slot until the module
is inserted into the system completely. The handle locking
button on the panel of the rectifier module will lockup the
rectifier module automatically and fix the module on the
subrack. When the number of rectifier module is less than
three, the installation of the rectifier module on the subrack
should accord to the sequence from left to right, and install
the blank panel on the rest empty positions.
When removing the rectifier modules from the main cabinet,
first withdraw the handle on the panel of the module forth to let locking button break
away from the subrack, then pull the module out.
2. Installation and Disassemble of Monitoring module
Slowly push the monitoring module into its slot along the
guide rail until the connection terminals on the back of the
component are inserted into the corresponding sockets on
the motherboard of the main cabinet. The handle locking
button on the panel of monitoring module will lockup the
monitoring module automatically and fix the module on the
subrack.
When removing the monitoring modules from the main
cabinet, first withdraw the handle on the panel of the module
forth to let locking button break away from the subrack, then pull the module out.
Note:
Rectifier module and monitoring module of the power supply system are of hot-plug
permissible, but their plug-in devices are precision locating components. So it
should not be energetically to avoid damaging the plug-in devices of the module.
Only the professional technicians are allowed to replace the module with power on.
COM
MS
PSM-B9
Handle
ALM
FAN-ALM
RUN
Handle
HRS1150-9000
Summary of Contents for GIE 4820/3A/3.45KW
Page 4: ......
