F180 Series
D450016T012
Instruction Manual
MCK-1094
February 2008
R
www.emersonprocess.com/regulators/lp
F180 Series Excess Flow Valves for
Compressed Air Service
!
WARNING
Failure to follow these instructions or to
properly install and maintain this
equipment could result in property
damage and personal injury or death.
Fisher
®
equipment must be installed,
operated, and maintained in accordance
with federal, state, and local codes and
Fisher instructions.
Only personnel trained in the proper
procedures, codes, standards, and
regulations of the applicable industries
should install and service this equipment.
!
WARNING
A break or leak downstream of an
excess flow valve that does not allow a
flow equal to the valve flow rating will
not actuate the excess flow valve and
could result in property damage or
personal injury from a whipping hose or
high volume discharge of air. For this
reason the operator must be familiar
with the system shutoff valves and close
the system if an emergency occurs.
Introduction
Scope of Manual
This instruction manual covers installation and
maintenance for F180 Series excess flow valves used
on compressed air service.
Figure 1.
F180 Series Excess Flow Valves
TYPE F186
TYPE F187
TYPE F188
