Emerson FB1100 Flow Computer Instruction Manual
D301752X012
August 2020
16
Installation
Figure 2-5. Retaining Clamp and Screw
2.6.2
Removing the Front or Rear End Caps
DANGER
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end cap(s) in a
hazardous location could result in an explosion.
Note
If you need more leverage place a long screwdriver or other appropriate tool across the two
notches in the end cap to act as a pry bar (see
Figure 2-5
).
Figure 2-6: Removing or Tightening the End Cap with Long Screwdriver
1.
Remove the retaining clamp (if present). (See
Section 2.6.1
.)
2.
Grasp the end cap (front or rear).
Figure 2-7: Front (left) and Rear (right) End caps
Summary of Contents for FB1100
Page 14: ...Emerson FB1100 Flow Computer Instruction Manual D301752X012 August 2020 10 Introduction ...
Page 48: ...Emerson FB1100 Flow Computer Instruction Manual D301752X012 August 2020 44 Installation ...
Page 87: ...Emerson FB1100 Flow Computer Instruction Manual D301752X012 August 2020 Index 83 ...