Emerson Dixell XR70T, Installing And Operating Instructions

Page: 19 / 40

1592040000 XR70T EN v1.1 2019.07.09 XR70T 19/40
d4 Probe P4 value visualization
rSE Real regulation Set Point
FdY Firmware release date: day
FMt Firmware release date: month
FYr Firmware release date: year
rEL Firmware release: progressive number
Sub Firmware sub release: progressive number
Ptb Parameter map version
5.2 PARAMETER CONFIGURATION 1
Group Par. Description Value
Protec
ted
U.O.M. Range
rEG SEt Set Point 3.0 Pr1 °C LS to US
rEG LS Minimum Set point -100.0 Pr1 °C
[-100.0°C to SET]
[-148.0°F to SET]
rEG US Maximum Set point 150.0 Pr1 °C
[SET to 150.0°C]
[SET to 302.0°F]
rEG HY
Compressor regulation differential in
normal mode
3.0 Pr1 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG HYE
Compressor regulation differential in
energy saving mode
3.0 Pr1 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG odS Output activation delay at start-up 0 Pr1 min 0 to 255 min
rEG AC Anti-short cycle delay 0 Pr1 min 0 to 50 min
rEG rtr
Regulation percentage=F(P1; P2)
(100=P1; 0=P2)
100 Pr2 0 to 100
rEG CCt Maximum duration for Pull Down 00:00 Pr2 hh:mm 0 to 23h50min
rEG CCS
Pull Down phase differential (SET+CCS
or SET+HES+CCS)
0.0 Pr2 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
rEG oHt
Threshold for automatic activation of
Pull Down in normal mode
(SET+HY+oHt) 10.0 Pr2 °C
[0.0°C to 25.0°C]
[0.0°F to 45.0°F]
rEG oHE
Threshold for automatic activation of
Pull Down in energy saving mode
(SET+HES+HYE+oHE) 10.0 Pr2 °C
[0.0°C to 25.0°C]
[0.0°F to 45.0°F]
rEG Con Compressor ON time with faulty probe 10 Pr1 min 0 to 255 min
rEG CoF Compressor OFF time with faulty probe 15 Pr1 min 0 to 255 min
Prb ot Probe P1 calibration 0.0 Pr1 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
Prb P2P Probe P2 presence Y Pr1 n(0); Y(1)
Prb oE Probe P2 calibration 0.0 Pr1 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
Prb P3P Probe P3 presence no Pr1 n(0); Y(1)
Prb o3 Probe P3 calibration 0.0 Pr1 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
Prb P4P Probe P4 presence no Pr1 n(0); Y(1)
Prb o4 Probe P4 calibration 0.0 Pr1 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
diS CF
Temperature measurement unit:
Celsius; Fahrenheit
°C Pr1 °C(0); °F(1)
diS rES
Temperature resolution: decimal,
integer
dE Pr1 dE(0); in(1)
diS Lod Probe default displayed P1 Pr1
P1(0); P2(1); P3(2);
P4(3); SEt(4); dtr(5)
diS rEd Remote probe displayed (for XH-REP) P2 Pr1
P1(0); P2(1); P3(2);
P4(3); SEt(4); dtr(5)
diS dLy
Temperature display delay (resolution
10 sec)
00:00 Pr1 mm:ss 0.0 to 20min00sec
diS dtr
Probe visualization
percentage=F(P1;P2) (ex: dtr=1
means VALUE=0.01*P1+0.99*P2) 99 Pr1 1 to 99