Emerson Dixell XC15CX, Installing And Operating Instructions

Page: 26 / 40

1592001530 XC15-35CX EN r1.2 11.04.2017 XC15-35CX 26/40
oAn Analogue output:
-
nu =output not used
-
onF =output activated when controller in ON
-
ALr =alarm output
-
EFn =electronic ventilator control
-
PrP =analogue repeater
-
inV =inverter-controlled compressor output
bEn Buzzer enabled: n; Y
15.16 DIGITAL INPUTS
Digital inputs 1 and 3 depend on the presence of probe P3 and P4 respectively. Digital input 2 is
always available.
ixF Digital input function (x=1, 2, 3):

nu =not used

Enb =enabling regulation signal

LP =external low pressure alarm

HP =external high pressure alarm

ES =energy saving mode activation and deactivation

SiL =silent mode activation and deactivation

EAL =external alarm (warning)

bAL =external alarm (lockout)

oAx =output oAx (x=1, 2, 3, n) deactivation

rEV =inversion for analogue output ( oAn=PrP )
ixP Digital input polarity (x=1, 2, 3)

oP = active when contact is open

CL = active when contact is closed
dxd Activation delay for digital input (x=i, 2, 3): 0 to 255 min
nPx Max number of external alarm events, detected from a digital input, before
stopping the regulation (x=1, 2, 3):
(0 to 15) if ixF=LP , HP or bAL , after detecting
nPx alarms in an interval of time diA , the regulation will be stopped.
diA Interval of time for LP, HP, bAL lockout alarm management: 0 to 100 hours.
When diA=0 this function is disabled.
HPF Minimum time with compressor locked in case of LP, HP, bAL lockout alarms:
0 to 15 min
Ar Regulation restart in case of any lockout alarm: MAn =manual, a power-off and
power-on is required; Aut =automatic after resetting the alarm condition
15.17 OTHER
Adr Serial address: 1 to 247
Hur Real Time Clock: 0 to 23 hours
Min Real Time Clock: 0 to 59 min
dAY Real Time Clock: Sun to Sat, day of the week
Hd1 First holiday of the week: Sun to Sat
Hd2 Second holiday of the week: Sun to Sat
iLE Start time for silent mode on workdays: (0.0 to 24h00min, res. 10 min) when the
silent mode is active the maximum speed of ventilators will be set to the value of
par.
FSS .
dLE Silent mode duration on workdays: 0.0 to 23h50min, res. 10 min
iSE Start time for silent mode on holidays: (0.0 to 24h00min, res. 10 min) when the
silent mode is active the maximum speed of ventilators will be set to the value of
par.
FSS .
dSE Silent mode duration on holidays: 0.0 to 23h50min, res. 10 min