manualshive.com logo in svg

Emerson Daniel 762, User Manual

Share
Download
Emerson Daniel 762 User Manual Download Page 66

WARNING!

CRUSHING HAZARD

During installation or removal of a control valve, always place the unit on a stable platform or
surface that supports its assembled weight.

Failure to comply may allow the control valve to roll, resulting in death, serious injury or
equipment damage.

Control valve storage conditions

Table 3-1:   

Parameter type

Description

Storage environment
conditions

For long term storage, it is recommended that the complete control
valve assembly be stored under cover in a controlled environmental at-
mosphere in the original packaging. The storage temperature limits
are: 20 ºC to 60 ºC (68 ºF to140 ºF) .

Shelf life for elastomers

Inspect O-rings for wear or damage during disassembly of the cover
and right before assembling the unit. Replace damaged elastomer.
FKM has an unlimited shelf life.

Inspect stored equip-
ment

Examine the internal surfaces and flange faces of the control valve at
least once every three months.
Repack the control valve as originally received.

Labels and nameplates

Do not remove nameplates or labels. Doing so will void the control
valve warranty.

Stacking conditions

When stacking equipment, follow all the safety standards taking into
account the type of box used, the maximum height of the equipment,
the maximum number of boxes stacked, etc.

Control valve handling

56

 Daniel Models 762, 763, 765, 766 and 767 Control Valves

Summary of Contents for Daniel 762





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands