manualshive.com logo in svg

Emerson Daniel 762, User Manual

Share
Download
Emerson Daniel 762 User Manual Download Page 57

Interface requirements

Table 2-3:   

Requirements

Description

Flange type

The mechanical connections for Models 762,
763, 765, 766 and 767 control valve NPS 2 to 16
are standard class 150, 300 and 600 ANSI R.F.
flanges, which are available only in carbon steel.
Other types of flange connections are available
per customer request for Daniel control valves.
For other ANSI ratings or flanges consult the fac-
tory engineers. For maximum working pressures
at intermediate temperatures refer to ANSI
B16.5.

WARNING!

FLANGE SIZE HAZARD

Customers must choose the appropriate size material of the flange for their piping
requirements.

Choosing an incorrect flange may cause a pressure leak, resulting in death or serious injury.

2.2.2

Requirements and limitations for installation

NOTICE

Comply with local government regulations and company requirements.

See 

Figure 2-1

 for flow direction.

NOTICE

Flush lines to remove welding bead, pipe scale, etc.

Operating conditions and specifications

User manual 

47

Summary of Contents for Daniel 762





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands