User Manual
Operation
QCL-MAN -CT2211-Aerosol-Leak-Detection-System-Rev F
October 2015
Operation
29
5.4
Control system programs
The aerosol leak detection system loads parameters from a number of different
sources. One of those sources is the program file. The parameters loaded from the
program file are:
1.
Output gate position
2.
Cascade input gate position
3.
Cascade output gate position
4.
Rejector position
5.
Can diameter
6.
Bin full time
7.
Maximum consecutive rejects — line stoppable
8.
Maximum repeatable rejects — line stoppable
Use of an incorrect program may lead to degraded performance of the control system,
and the wrong cans may be rejected.
Use the Program Page | Program Selector to change or load a Control System
program. A login security level of Power User or higher is required for an operator to
save changes to the program.
The
save changes
button applies the changes to the currently loaded program.
The Program Description provides detailed information about the currently loaded
Control System program.
Figure 5-12
Program Page
