To make changes to a CSI 9420, AMS Device Manager settings must allow AMS Machinery
Manager to make changes.
Note
In some cases, if the gateway device is connected to a HART host such as DeltaV, any changes made
using the AMS Machinery Manager software will be rejected. In such cases, contact your DeltaV
administrator or an instrument technician who is authorized to make the required configuration
changes.
Alert-based data collection (Enable Store on Alert)
When you chose an alert-based data collection, overall vibration and PeakVue
measurements are processed to determine the alert state of the equipment being
monitored. Then you can select at what alert level to trigger retrieval of the spectrum or
waveform associated with that sensor. Alert-based data collection typically results in a
longer life for your Smart Power Module.
Time-based data collection (Disable Store on Alert)
When you choose time-based data collection, you can store waveforms, high-resolution
spectra, and thumbnail spectra are requested on a timer. The same information is
collected periodically without regard to the device's alert status. Time-based data
collection typically shortens the life of your Smart Power Module.
CSI 9420 Publishing Policy
The Data Import program provides an easy credit-based system to control how often data
is collected and transmitted from each of your CSI 9420 transmitters. You can collect on-
demand acquisitions without impacting the CSI 9420 Publishing Policy.
On-demand acquisitions
When you collect on-demand acquisitions you do not impact the CSI 9420 Publishing
Policy. Time-based or Alert-based acquisition requests will continue according to the
acquisition parameters for that device. All acquisitions, however, impact the life of your
Smart Power Module.
2.4.3
CSI 9420 publishing policy
The CSI 9420 publishing policy is a credit-based system to control automated data
requests and publishing rates. It helps you easily limit data traffic and data collection on
your CSI 9420 transmitters. For CSI 9420 transmitters with a Smart Power Module, a
publishing policy also helps extend the life of the power module by limiting the data
collection and publishing. The publishing policy does not prevent on-demand readings.
You can collect an on-demand reading from the CSI 9420 at any time.
The publishing policy may help if you have many transmitters and have some of the
following concerns:
•
You want to conserve the life of your Smart Power Module.
•
You may have a control environment.
•
You want to limit how often you request data.
Configuration
MHM-97408, Rev 15
63
Summary of Contents for CSI 9420
