5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF790
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
WARNING
!
3.1
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to install
the ceiling fan mounting plate on the outlet box.
3. Ceiling Fan Assembly
3.2
Remove the hanger ball by loosening the setscrew in
the hanger ball until the ball falls freely down the
downrod (Figure 1).
Remove the pin from the downrod, then remove the
hanger ball.
Retain the pin and hanger ball for reinstallation in
Step 3.8.
NOTE: Do not loosen the screw holding the green
ground wire.
SETSCREW
(LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
Figure 1
3.3
Separate, untwist and unkink the three 80” motor leads.
Route the 80” black, blue and white motor leads
through the downrod (Figure 2).
4.5" DOWNROD
THREE 80" MOTOR
LEADS (UNTWISTED)
Figure 2
