18
ETL Model No.: CF790
7. Wall Control Installation
(Continued)
7.3
Before installing the SW405 wall control, place the
SW405 wall control in “OFF” mode by pushing
“ON/OFF” switch to the “OFF” position.
7.4
Connect one black wire of the SW405 wall control to the
“hot” wire. Securely connect wires with wire connectors
supplied (Figure 30).
7.5
Connect one black wire of wall switch to the “load”
(black) wire in wall box. Securely connect wires with
wire connector supplied.
7.6
Screw the SW405 wall control into wall box using the
supplied screws. Leave the SW405 wall control in
“OFF” mode until fan installation is completed.
7.7
The SW405 wall control is supplied with a white, ivory,
and almond color switch covers. Choose the finish that
best suits your needs and snap the cover onto the
SW405 wall control (Figure 30).
7.8
Install decorator wall plate using the two screws
provided with wall plate. Leave the SW405 wall control
in “OFF” mode until fan installation is completed
(Figure 30).
SW405 FAN/LIGHT
WALL CONTROL
WALL
BOX
BL
AC
K
BL
K
HOT
NEUTRAL
WIRES
DECORATIVE WALL PLATE
SCREWS (2)
SWITCH COVER
T
O 1
20VAC SO
URCE
T
O LOAD
G
R
OU
ND
OFF
ON
....
OFF
ON
....
Figure 30
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
WARNING
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
WARNING
!
