10
ETL Model No.: CF790
3. Ceiling Fan Assembly
(Continued)
3.17
Remove the three #8-32 x 5/16” flat head screws from
the switch housing adapter (Figure 14).
Retain the screws for future use in Step 3.19.
Spare #8-32 x 5/16” flat head screw is provided in parts
bag if needed.
NOTE: If you are using an Emerson light fixture
with your fan. Remove the screw plug from the
bottom of the switch housing cover and install the
light in accordance with the light kit Owner's
Manual. Make light kit electrical connections to blue
and white leads marked “For Light” in the switch
housing assembly. Follow light kit instructions for
wiring and installation. Then reinstall switch
housing as outlined above.
SWITCH
HOUSING
ADAPTER
REMOVE THREE #8-32 x 5/16"
FLAT HEAD SCREWS
Figure 14
3.18
Match and engage the color coded connector of the
switch housing assembly with the color coded motor
connector (Figure 15).
The two connectors are keyed and color-coded and
must be mated correctly (color-to-color) before they can
be engaged.
Make sure the connector latch closes properly.
SWITCH HOUSING
ASSEMBLY
CONNECTOR
FAN MOTOR
CONNECTOR
SWITCH HOUSING
ASSEMBLY
Figure 15
3.19
Position the switch housing assembly on the switch
housing adapter and align the holes in the switch
housing assembly with the holes in the adapter.
Secure the switch housing assembly by reinstalling
the three #8-32 x 5/16” flat head screws (previously
removed in Step 3.17) (Figure 16).
NOTE: Do not pinch wires between the switch
housing assembly and the switch housing adapter.
REINSTALL THREE #8-32 x 5/16"
FLAT HEAD SCREWS
SWITCH
HOUSING
ASSEMBLY
Figure 16
