3
Unpacking Instructions
For your convenience, check-off boxes are provide next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
General Information
Check the kit (Figure 1) to see that you received the
following parts:
1. One ceiling cover
2. One hanger bracket assembly
3. One hanger ball
4. One hex wrench
If any parts are missing, contact your local retail or
catalog outlet for replacement before proceeding.
This Sloped Ceiling Kit can be used with any
Emerson ceiling fan. This kit must only be attached to
an outlet box marked acceptable for fan support.
CEILING
COVER
HANGER BALL
HEX WRENCH
HANGER BRACKET
Tools Needed for Assembly
One 1/4" blade screwdriver
One stepladder
One 5/32" setscrew wrench
One Phillips head screwdriver
One wire stripper
Figure 1
Do not install or use the sloped ceiling kit if any
part is damaged or missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those
parts supplied with this product and/or any
accessories designated specifically for use
with this product by Emerson Electric Co.
Substitution of parts or accessories not
designated for use with this product by
Emerson Electric Co. could result in personal
injury or property damage.
WARNING
!
WARNING
!
To reduce the risk of fire, electric shock, or
personal injury, mount fan to outlet box marked
acceptable for fan support, and use screws
supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are
not acceptable for fan support and may need to
be replaced. Consult a qualified electrician if in
doubt.
WARNING
!
