38.1
30
38.1
20.4
8.7
AF
15
30
Ø27.5
83
4.8 (4x)
Ø15
(2x)
M4 (4x)
15
66
Option with
T-handle
Option with
adjustment screw
Ø2.4
15
17.2
8.9
5
Fig. 4: Crimped version with low flow dimensions
50
38
42
20
26
62
15
30
Ø27.5
118
2
6.9
Ø15 (2x)
M5 (4x)
32
11
5
15
68
Option with
T-handle
Option with
adjustment screw
Ø2
Fig. 5: Crimped version with high flow dimensions
5 Transport and storage
5.1 Transporting the product
Hazards during transportation
To eliminate risks during transport, observe the following instructions:
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings (accident prevention, material protection).
• Do not stand under suspended loads (accident prevention).
• Take steps to avoid damage when lifting the product (accident prevention,
material protection).
• Heavy products and components must be carried by two people or by one
person with lifting aids (accident prevention, material protection).
• Wear appropriate protective clothing (e.g. sturdy footwear).
5.2 Storing the product
Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Comply with the limits: see section
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Avoid direct sunlight.
• Keep the product in the original or delivery packaging until the time of instal-
lation.
• Observe the storage requirements in these instructions. Also observe any ad-
ditional storage information on the product packaging.
Compressed air connections
1.
Ensure that all compressed air connections are protected against contamina-
tion by protective caps.
2.
Tape open compressed air connections or provide them with suitable protec-
tive caps.
5.3 Returning the product
Proceed as follows to return the product:
1.
If the product has already been mounted: Dismount the product (see section
2.
Package the product in its original packaging.
If the original packaging is no longer available: Select suitable replacement
packaging in consultation with EMERSON (contact details: see back cover).
3.
If the product cannot be returned immediately: Observe the storage condi-
tions (see section
4.
Return the product.
6 Assembly and installation
Before you start with the installation: Familiarize yourself with the basic specifica-
tions for assembly as early as possible in advance: see sections
and
6.1 Planning
In the following, you will read which basic requirements must be met so that you
can successfully and safely assemble the product.
Do not carry out the preparation and installation steps until you have successfully
completed the planning.
6.1.1 Basic requirements
The following specifications apply to the assembly of all products.
Installation conditions
• Observe the installation conditions: see section
AVENTICS™
645 | 548325-001 | English
16
