a) Install the new elastomer backing cushion over the tube nut.
b) Invert the PTFE diaphragm by pressing the center of the diaphragm face with your thumbs while
holding the edge of the diaphragm with your fingers.
c) Engage the threads of the diaphragm into the tube nut by rotating clockwise.
d) Continue rotating the PTFE diaphragm clockwise into the compressor while securing the backing
cushion from rotating.
3. Rotate the diaphragm until hard stop or heavy resistance is achieved and additional force does not
significantly rotate the diaphragm into the compressor.
Installation (Continued)
8
Advantage
®
Actuator Installation and Operation Manual
Designed and Manufactured by ITT
