Display and Orientation
19
Instruction Manual
Display and Orientation
LIQ_MAN_6081-P
February 2014
Section 6: Display and Operation
6.1. Display
The 6081 has a two-line display. Generally, the user can program the transmitter to show one of
three displays. If the transmitter has been configured to measure ORP or Redox, similar displays
are available. Figure 6-1 shows the displays available for pH. The transmitter has information
screens that supplement the data in the main display. Press to view the information screens. The
first information screen shows the type of measurement being made (pH, ORP, Redox). The last
information screen is the software version number. During calibration and programming, key
presses cause different displays to appear. The displays are self-explanatory and guide the user
step-by-step through the procedure.
Figure 6.1 Displays During Normal Operation
Screen A shows the pH reading, the temperature, and the output current generated
by the transmitter. Screen B shows the same information as Screen A except the output
current has been substituted with the raw sensor voltage. Screen C is most useful while
troubleshooting sensor problems.
