manualshive.com logo in svg

Emerson 6081-P, Instruction Manual

Share
Download
Emerson 6081-P Instruction Manual Download Page 17

Instruction Manual   

 

 

 

                                                  

           Installation 

LIQ_MAN_6081-P 

 

 

 

 

 

 

 

 

             February 2014 

     

Installation 

 

 

 

 

 

 

 

 

 

 

                        9

2.6           Power Module Installation

The section describes the procedure for installation of the power module (

PN 701PBKKF or 

PN 00753-9220-0001

).  The power module should stored in a safe place with a controlled 

environment until the 6081 is ready for live operation.  For first time installation of the power 

module, follow these steps:   

1.   Unscrew the two long machine screws to remove the rear cover of the 6081. Separate the rear 

cover from the central housing by manually prying the sections apart. Do not use screwdrivers 

or  tools to separate these housing parts. The parts are sealed with an o-ring. 

Figure 2-3. Removing rear cover

2.   Before installation, note the safety warning, disposal instructions and part information on the 

connection-side label of the power module. 

Figure 2-4. Power Module Warning Label

3.  With the 6081 front display section facing away from you, align the power module pack 

with the curved surface of the pack facing towards you and the small protruding connector 

facing away from you.  Make sure to align the power module and its keyed connector with the 

connection receptacle in the middle of the instrument’s terminal block area.  

Figure 2-5. Installing the Power Module

Summary of Contents for 6081-P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands