manualshive.com logo in svg

Emerson 6081-P, Instruction Manual

Share
Download
Emerson 6081-P Instruction Manual Download Page 19

Sensor Wiring 

 

 

 

 

 

 

 

 

 

 

                        11

Instruction Manual   

 

 

 

                                                  

      Sensor Wiring 

LIQ_MAN_6081-P 

 

 

 

 

 

 

 

 

             February 2014 

     

Section 3: Sensor Wiring

3.1           General Information

pH and ORP sensors without preamps manufactured by Rosemount Analytical can be wired 

directly to the 6081-P wireless transmitter.  

3.2           Sensor Wiring

To assist in sensor wiring, please refer to the one of the following resources: 

1. Sensor Instruction Sheet – provided with each shipped sensor.  Detailed wiring drawings show 

terminal block connections for each sensor lead. 

2. Online wiring program available at http://www.emersonprocess.com/raihome/liquid/

products/wiring/Xmt displays wiring schematics for all compatible pH sensors.   

3. CD-ROM included in every shipped instrument unit contains Rosemount Analytical’s wiring 

program. 

The following drawing identifies each terminal block lead position for pH sensors.  

Figure 3-1. Sensor Wiring & Connection Points for 6081

NOTE

For additional wiring information on this product, including sensor combinations not shown here, please 

refer to either our online wiring programs or the Manual DVD enclosed with each product.  

1056, 1057, 56, 5081, 6081, 54e, and XMT : http://www3.emersonprocess.com/raihome/sp/liquid/wir

-

ing/XMT/

1066 and sensors with SMART preamps: http://www2.emersonprocess.com/en-US/brands/rosemountan-

alytical/Liquid/Sensors/Pages/Wiring_Diagram.aspx

1055: http://www3.emersonprocess.com/raihome/sp/liquid/wiring/1055/

NOTE

All sensor wiring must be rated for ≥ 70 °C.

Summary of Contents for 6081-P

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands