9
emcotherm
control technology
Subject to technical changes without prior notice! June 2008
Safety Information
2
Safety-conscious operation
2.1
The highest level of safety and a high standard of quality are a matter
of course to us, which is why all emcotherm control components have
been developed, manufactured and tested according to the latest
applicable norms, standards and directives.
Safe operation of emcotherm control components and the devices
connected to them can only be guaranteed if the control components
and connected devices are in a technically correct condition and are
used in a safe and aware manner according to their intended use!
For your own safety, we strongly recommend that you read and adhere
to all safety instructions in this manual as well as those in the manual
of connected devices (convector) before fitting, installing, operating
and using the emcotherm control components.
Personnel qualification
2.2
In normal operating situations it is assumed that both emcotherm
control components and connected devices (convectors) are properly
fitted, electrically installed and ready for operation. Basic operation
and setting functions of the emcotherm control components can
be executed by semi-skilled and trained personnel according to the
directions in this manual.
All activities that go beyond simple operating and adjusting functions
such as fitting, installation, error / fault remedying and repairs must be
carried out by trained and qualified specialists.
DANGER !
DANGER !
All electrical installations, connecting, and disconnecting the
emcotherm control components may only be carried out by electrical
specialists* in compliance with the electrotechnical regulations.
* Definition of an electrical specialist as per:
Regulations for the Prevention of Industrial Accidents- Electrical
Systems, BGV A3 and
German Low Voltage Connection Ordinance (NAV)
Non-observance of this information can lead to death or serious
→
bodily
injury.
Competency and authorisation of personnel are to be determined by
the operator.
214OI_control_technology_GB_id8506280_0890112.pdf 9
12.01.2009 12:11:42 Uhr