7
emcotherm
control technology
Subject to technical changes without prior notice! June 2008
Furthermore, it is imperative to adhere to all general safety-related
conditions at the installation site as well as all relevant valid directives
for the application, such as rules for accident prevention et al.
Regulations and possible uses of the various emcotherm control
components are documented in this manual as well as in the manual of
the respective convector.
In general,
all emcotherm control components are to be used only in
enclosed interiors
(e.g. residential, commercial or showroom space)
with central European conditions
DANGER !
DANGER !
Use in
damp areas (e.g. swimming pools) or outside of enclosed
buildings is not
intended and therefore not
allowed.
Non-observance of this information can lead to short circuits in the
→
electrical installation, as well as to death or serious bodily injury.
DANGER !
DANGER !
emcotherm control components do not meet the requirements of the
ATEX Directive; their use and operation in potentially explosive areas is
forbidden.
Failure to comply with this information can lead to explosions,
→
as well as to death or serious bodily injury.
Improper use
1.7
Any use of the control components that differs from the use described
in this manual is considered improper use. The manufacturer is NOT
responsible for any personal and property damages resulting from
improper use. Any such damage is the sole responsibility of the user
Legal information, copyrights
1.8
This manual may not be electronically or mechanically copied,
distributed, changed or transmitted, translated or otherwise used
without the prior approval of emco Bau- und Klimatechnik GmbH & Co.
KG.
emco are not liable for damage resulting from non compliance or
partial non compliance with this manual. Handing over this manual
does not justify any claim to a licence or use.
214OI_control_technology_GB_id8506280_0890112.pdf 7
12.01.2009 12:11:42 Uhr