6
emcotherm
control technology
Subject to technical changes without prior notice! June 2008
WARNING !
WARNING !
Please note that a symbol or pictogramme can never take the place of
a text or instruction! Always be sure to read each text or instruction in
full!
Other symbols used in this manual:
1.4.1
=
Heating
=
Cooling
=
Secondary air
=
Ventilation
(external fresh air connection)
Supporting documents
1.5
WARNING !
WARNING !
Warning !
This manual only contains partial documentation and technical
instructions for the emcotherm control components and accessories.
The use of the components described in this manual as well as their
operation, fitting and installation should always be regarded together
and in connection with the respective convector.
Please always carefully read the manual for the convector and follow
all safety, operation and information instructions contained therein.
Intended use
1.6
emcotherm control components have been manufactured according
to the latest technology and recognised safety-related regulations, in
accordance with norms and standards as listed in the technical data
section of this manual. However, improper use can result in serious
danger to the user or third parties as well as damage the control
components and/or any devices connected to them.
emcotherm control components may only be used in a technically
correct condition, in compliance with safety and precautionary
measures, according to their intended use and in compliance with
all operating, fitting, installation and maintenance instructions! Any
errors or failures, that could affect safe operation must be taken care of
immediately!
214OI_control_technology_GB_id8506280_0890112.pdf 6
12.01.2009 12:11:42 Uhr