Emco Tech Delphi IO400U, Owner'S Manual

Page: 9 / 18

15 16
Accessories
How to Install How to connect water faucet
How To Install
Connecting the Delphi faucet
pH test kit
Hose(1/4")
Hose(5/16")
Manual
Alkaline Water
Acidic Water
Tap Water
Tap Water
Connect Wire
Water Ionizer
DUST PRE- FILTER
Faucet
Tap water
Faucet
Circle Plate
Circle Plate
Tool
Large Alkaline
Water Fitting
Small Acidic
Water Fitting
1
2
Use appropriate tools to make 30mm
diameter hole in the location where you will set
up the faucet. Make sure the faucet location
will allow both spouts to reach the sink.
Place the faucet in the hole properly over
the gasket.
3
4
Insert the faucet in the hole and then screw
it with a nut to make it be fixed.
30mm
(Alkaline Water Hose)
(Acidic/Tap Water Hose)
Connector Cord
1/4” Tube(Acidic Water)
5/16” Tube(Alkaline Water)
Acidic Water
Alkaline Water
Connector Cord
All the fittings are push in style fittings. To attach the hoses to any fitting, firmly insert the end of
the hose into the fitting. Pull firmly to check to connection - you should not be able to pull the
hose out. To release the hose from the fitting, you must push the spring loaded ring protruding
from the end of the fitting while pulling the hose out.
WARNING WARNING: incorrect installation could void your valuable warranty : incorrect installation could void your valuable warranty
- professional installation is recommended. - professional installation is recommended.
After the faucet is fixed, connect it to fitting
with 5/16” hose(for Alkaline) like figure 4.
Check the hose whether it is inserted properly
or not. Also, connect it with 1/4” hose(for Acidic)
like figure 4 and connect the faucet to the body
with connector cord.
Figure 1
Figure 2
Figure 3
Figure 4
Gasket
(installed under
the Faucet)
Product Requirement : Product Requirement :
Water pressure should be maintained at a constant rate,
Water pressure should be maintained at a constant rate,
when the water pressure is too low, water cannot flow through the unit.
when the water pressure is too low, water cannot flow through the unit.