7
8
Electrical power precautions
Do not attempt to repair the machine if you encounter a technical problem, first contact the
IonWays Associate you purchased the machine from, then IonWays Technical Support if needed.
Safety Precautions
If your ionizer becomes submerged in water, unplug the power
cord from the wall BEFORE removing the ionizer from the water.
Failure to do so may cause electric shock!
NEVER
NEVER attempt to repair or service the unit yourself.
Contact your dealer.
Attempting to do so will void your valuable warranty!
Attempting to do so will void your valuable warranty!
Do not use your ionizer at voltages other than specified (AC 110V FOR USA).
Use a GFI outlet. Do not plug in your ionizer where it will exceed the rating of
outlet or electric wiring.
Failure to do so can result in fire, injury and/or damage to yourself,
wiring or your ionizer!
NEVER touch the power cord or plug with wet hands
- this may result in electric shock!
Ensure the power plug is firmly and properly inserted into the outlet
- failure to do so may result in electric shock or fire!
Installation Precautions
Protect your ionizer from freezing temperatures.
Protect your ionizer from direct sunlight.
Do not put anything heavy on top of your ionizer.
Do not install your ionizer on an unstable or soft surface.
Install only on a hard and level surface.
Maintenance Precautions
Common Sense Precautions
Always unplug your ionizer when changing the fuse or cleaning your ionizer
- failure to do so may result in electric shock.
Do not attempt to repair or service the unit yourself. Contact your dealer.
Attempting to do so will void your valuable warranty!
Make sure to use your ionizer only with potable water which is
suitable for human consumption.
DO NOT use your ionizer with well water, water with extreme hardness, high sediment or
TDS levels without first consulting your dealer.
Do not wash your ionizer by immersion or by pouring water over the main body;
always unplug your ionizer while cleaning the casing.
Clean with damp sponge or cloth.
220V
Summary of Contents for Delphi IO400U
Page 1: ......
