1
5
6
2
3
4
25
26
How to Add Calcium
Stop the water flow prior to calcium replacement.
- Water will overflow if you open the calcium cap while
water is coming out.
Unscrew the cap to the left and remove.
-The first time you remove it the cap
may be tight. Use a butter knife to
work it free.
Open
Close
Take the basket apart from the cap and dispose of the
remaining beads. The beads never completely disappear
- it's the calcium coating on the beads that slowly releases
into the water. Beads will release calcium for about 1-2
months depending on amount of use and pH of water.
Wash the basket and remove all water.
Add the new calcium beads and close
the cap.
Insert the basket into the calcium port and
twist the cap closed.
- Water will overflow if you do not close
the cap tightly.
REGULARLY CHECK AND CLEAN YOUR IN-LINE PRE-FILTER
Keeping the in-line pre-filter clean is critical to the proper operation of your ionizer.
First ensure your water supply is turned off.
Then remove the in-line pre-filter by pressing the spring loaded ring protruding from the end
of the fitting while pulling the hose out. Rinse out the filter thoroughly to remove any built up
particulate. Rinse from both sides.
Reinstall it.
Clean the filter in this way any time you notice a decreased flow from your ionizer.
To release the hose from the fitting, you must push the spring loaded ring protruding from the
end of the fitting while pulling the hose out.
Adding calcium to your machine is NOT needed unless you have unusually soft water,
low in minerals. If your machine is making adequate pH, there is no need to
add the calcium insert.
Plastic cap
Calcium cap(Chrome)
New cartridge
NOTE :
NOTE :
If you do not remove the plastic cap of a calcium cartridge,
If you do not remove the plastic cap of a calcium cartridge,
will crack the internal calcium port or leak the internal.
will crack the internal calcium port or leak the internal.
Summary of Contents for Delphi IO400U
Page 1: ......
