18
19
Accessories
How to install your Ultra Delphi
Faucet Accessories
Ionizer Accessories
pH test kit
Collet Release tool
Flexible Hose
Diverter Valve
T- Valve
Dust Pre-Filter
Color chart
Manual
Wall Mount Sheet
PE Hose(1/4”)
(Tap Water Supply Hose)
PE Hose(1/4”)
(Acidic / Ionizer Water Supply Hose)
PE Hose(5/16”)
(Alkaline Water Supply Hose)
Small Acidic
Water Fitting
Large Alkaine
Water Fitting
Alkaline Water outlet adapter
(Please connect to top cap of the ionizer
for installation Faucet.)
Circle Plate
Gasket
(Installed under the Faucet)
Allen Tool
Faucet Body
1/4”-1/4”
5/16”-5/16”
WARNING : Incorrect installation could void your valuable warranty - professional installation is recommended.
All the fittings are push in style fittings. To attach the hoses to any fitting
firmly insert the end of the hose into the fitting. Pull firmly to check to
connection - you should not be able to pull the hose out.
To release the hose from the fitting, use the provide collet release tool to
depress the spring loaded ring protruding from the end of the fitting while
pulling the hose out.
[Online videos are available showing the use of quick-connect fittings.]
Installation Method
1
2
3
4
5
Acidic Water
Alkaline Water
Tap Water
Direction
Ionizer inlet
fitting Direction
Data Cable
1.5” [30mm]
NUT
1/4” Tube
(Tap Water)
1/4” Tube
(Ionizer Inlet)
1/4” Tube
(Acidic Water)
5/16” Tube
(Alkaline Water)
Data Cable
Red
Grey
White
White
Use appropriate tools to make 1.5”(30mm) diameter hole in the
location where you will install the faucet.
Make sure the faucet location will allow both spout to reach
the sink.(Fig.1)
Unscrew circle plate from faucet body.
Place the faucet in the hole ensuring the gasket comes
between the faucet and your counter/sink top. (Fig.2)
Thread the circle plate on to the faucet body under
the sink secure the faucet. (Fig.3)
Connect the 1/4” small Acidic and Water fittings
and 5/16” large Alkaline Water fitting to the
corresponding faucet hoses. (Fig.4)
Fig.1
Fig.2
Fig.3
Fig.4
Method 1 : Under the sink with Faucet
