EMC2 CloudBoost 100, Hardware Component Replacement Manual

Page: 12 / 58

Table 1 Hardware acclimation times (systems and components)
If the last 24 hours of the
TRANSIT/STORAGE
environment was this:
…and the OPERATING
environment is this:
…then let the system or
component acclimate in
the new environment
this many hours:
Temperature Humidity
Nominal
68-72°F (20-22°C) Nominal
40-55% RH Nominal 68-72°F (20-22°C)
40-55% RH 0-1 hour
Cold
<68°F (20°C) Dry
<30% RH <86°F (30°C) 4 hours
Cold
<68°F (20°C) Damp
≥
30% RH
<86°F (30°C) 4 hours
Hot
>72°F (22°C) Dry
<30% RH <86°F (30°C) 4 hours
Hot
>72°F (22°C) Humid
30-45% RH <86°F (30°C) 4 hours
Humid
45-60% RH <86°F (30°C) 8 hours
Humid
≥ 60% RH
<86°F (30°C) 16 hours
Unknown <86°F (30°C) 16 hours
NOTICE
l
If there are signs of condensation after the recommended acclimation time has
passed, allow an additional eight (8) hours to stabilize.
l
Systems and components must not experience changes in temperature and humidity
that are likely to cause condensation to form on or in that system or component. Do
not exceed the shipping and storage temperature gradient of 45°F/hr (25°C/hr).
Removing, installing, or storing replaceable units
Use the following precautions when removing, handling, or storing replaceable units:
CAUTION
Some replaceable units have the majority of their weight in the rear of the component.
Ensure that the back end of the replaceable unit is supported while installing or
removing it. Dropping a replaceable unit could result in personal injury or damage to the
equipment.
CloudBoost 100 Overview
12
EMC CloudBoost 100 2.0 Hardware Component Replacement Guide