EMC CX700 SPE Setup Manual Download Page 27

Page: 27 / 29

Step 14

Enable Software

The following software is enabled on the storage system prior to shipment from the
factory:

•

Navisphere Manager

•

Access Logix

™

If you have any of the following optional software and it is not already enabled, you
need to enable it:

•

SnapView

™

•

MirrorView

™

•

SAN Copy

™

•

Analyzer

Enable Optional Software

Use the Software Installation Wizard of Navisphere Manager to install the enabler
(

.ena

file) from the CD that shipped with the software kit. For information on using

this wizard, see the Navisphere Manager online help.

Servers that use SnapView require admsnap software and servers that use SAN Copy require
the admhost software. The admsnap and admhost software is on the

EMC CX-Series Server

Support Products

CD and the procedure for installing it is in the

EMC CX-Series Server Support

Products Installation Guide

for your server’s operating system.

Summary of Contents for CX700 SPE






























Search results

Summary of Contents for CX700 SPE

Reviews:

Related manuals for CX700 SPE

Brands by name

Popular brands

EMC CX700 SPE, Setup Manual

Search results

Summary of Contents for CX700 SPE

Reviews:

Related manuals for CX700 SPE

Brands by name

Popular brands