Changing settings for Active Powerdown®
Your Embertec Emberstrip® 8AV+ is equipped with a number of settings
to suit your lifestyle. You can set your timer to either 1 or 2 hours,
depending on usage habits. This means the RF4CE Smart Sensor will
flash after the set period, warning of imminent power down. In every
case you can continue using your equipment by pressing the volume
button on any remote control.
The default setting is 1 hour, which is aimed to maximize your
home’s
energy savings.
Follow these instructions to change Active Powerdown® to 2 hours,
(this may be preferred for longer movies or programs where remote
control activity is less frequent).
To set the Active Powerdown® timer, simply press the SET button on
top of the sensor.
The 1 and 2 LED lights on top of the sensor will light up to show the
current setting. Push the SET button to toggle between the 1 hour
and 2 hour Active Powerdown® settings.
10
NOTE:
Make sure your AV System is on before you start changing settings!